• Protocontrol Instruments (India) Private Limited

Damaged Belt Detector/Belt Wair Monitor Rope Type

Conveyor belts are subject to wear and tear during operation. Repairs like vulcanisation and splicing have to be carried out from time to time. In large conveyor plants, impending belt damages are not always noticed in advance. Damaged Belt Detector Series: DBD, enables the following belt damages to be detected at an early stage: Parts of the belt have come off in shreds; Steel ropes stand off from the belt; Belt edges are torn; Facing of repair point have come off; Slices are defective; Sharp object protruding through the belt fabric.
Damaged Belt Detector is to be mounted in pairs, positioned on either side of the belt. The units are connected by two spans of special PVC coated cable. One end of the cable mounts permanently to a support bracket and the other end is connected to a spring-loaded ball located in a DBD unit. The switch gets actuated when an object or broken belt surface sweeps away one or both cables pulling spring-loaded ball out of socket.