• Kasera Heat Transfer Private Limited

Plate & Frame Heat Exchangers

Kasera Heat Transfer Pvt Ltd offers a range of Plate and Frame Heat Exchangers. The plate heat exchanger consists of a frame, which consists of a head, follower, column, carrying bar, guiding bar, and a number of clamping bolts. In between head and follower a varying number of pressed plates are clamped together. Each plate is supplied with a gasket, so that the plates form a closed system of parallel flow channels, through which the medias flow alternatively at every second interval. The Plate Stack – Medie: the gaskets are glued on the plates, securing tightness between medias and the atmosphere. Between the different medias there are double gaskets, which have intermediate drain areas, meaning that mixing of the two medias is impossible. Every second plate in the stack has to turn 180°, so that the plates form a closed system of parallel flow channels, through which the medias flow alternatively at every second interval. Gasket construction – new gaskets: the first plate after the head and intermediate frames is mounted with a gasket in all the gasket grooves. These gaskets are cut out of ordinary gaskets. Heat exchangers transfer the heat continuously from one fluid to another without using any energy. Two fluids are separated from each other by an obstacle (separator) completely. Main parts of exchanger are front body, rear body, back body, plate and seal elements. In addition to these parts for gasketed plate heat exchanger; carrying rods, studs, moving legs can be considered. All parts of plate heat exchanger can be easily separated from each other and can be easily assembled. In case, if any parts of the PHE cannot be used in, only that part of the PHE can be changed for solving the problem. Plated exchanger parts: stub, carriage of the bar, rear body, nuts and washers, finally back, flow plates, first plate, front body and connections of the mouth. The company also offers Shell & Tube Heat Exchanger, Finned Tube Heat Exchangers, Plate & Bar Oil Coolers, etc.