ATAM showcases sensors integrated in the connectors at Hannover Messe, 2023

  • Industry News
  • Apr 19,23
ATAM presents a new smart version of Form A connectors which integrates tested micro-sensors to measure and transmit important physical quantities, enabling engineers to monitor the health of the solenoid valve connected to the connector-coil assembly.
ATAM showcases sensors integrated in the connectors at Hannover Messe, 2023

ATAM, a reference company in the field of encapsulated coils and industrial connections for process valves and solenoid valves in pneumatic and hydraulic applications, presents an innovative system made up of micro-sensors – four sensors and one antenna – incorporated inside its Form A connectors at Hannover Messe 2023.
ATAM Form A connectors, which represent a consolidated market standard and one of the most widespread types, have dimensions that are able to house sensors (latest generation microcontrollers used in consumer electronics) capable of measuring and transmitting physical factors such as, by way of example, temperature, humidity, vibrations and electrical voltage, in real-time.

By integrating sensors onboard the connector, it is possible to monitor the physical quantities that influence the behaviour of the solenoid valve in real-time and in the same environment in which it operates. To date, the measurements of some of the physical quantities involved - which strongly influence the functioning of the entire machine - are detected indirectly and via remote controllers (not on board the valve), not allowing monitoring of what happens in correspondence with the solenoid valve itself.

Particularly harsh fields of application and extreme environmental conditions can, in fact, lead to values of temperature, humidity, vibrations and electrical voltage well beyond the foreseen conditions, thus damaging not only the solenoid valve but also the entire system; instantaneous monitoring, therefore, allows you to intervene in time, avoiding potential damage.

In the version presented at Hannover Messe, the ATAM Form A connectors with integrated sensors also incorporate LEDs which, through different colours and flashing functions with variable frequency, give operators immediate visual feedback on any values recorded outside the range’s optimal operations. Also for the larger connectors of the Form A range, ATAM is open to any form of customisation in terms of visual management and serial communication.

In the configuration presented in the preview, using a technical APP, the data measured by the sensors are continuously transmitted to a mobile device for constant monitoring of the machinery. This type of proximity communication (used in mobile payments) is a transceiver technology that provides two-way wireless contact connectivity. This ATAM platform also gives the possibility of inserting an interface card capable of communicating with the serial protocol used by the manufacturer of the machines that will mount its sensors on the connector board.