• Prime Electronics

Self Powered Electronic Loads

Prime Electronics offers Self Powered Electronic Loads, PE101SE. Features: light weight and portable (only 3 Kgs); easy to carry anywhere available with carrying handles; no requirement of any AC input, therefore can be operated at any place; ideally suited for testing of solar panel, battery bank and other DC sources; precise settings of load current possible with multi turn pot provided for load setting; provision to connect fixed load in parallel to enable higher load testing and continuous precise display of voltage and current on specially designed meters. Specifications: voltage range: 3 to 75 VDC; load range 0 A to 25 ADC; load wattage: 100 W (150 W maximum); load voltage range selector switch: 1st Position: 0 to 7.5 V / 25 A; 2nd Position: 0 to 15 V / 10 A; 3rd Position: 0 to 37.5 V / 5 A and 4th Position: 0 to 75 V / 2.5 A; load adjustment pot: 10 turn pot with indication dial for the number of turns and part of the turn; voltmeter: displays DC load voltage in four scales 0 to 7.5V /15V / 37.5V /75V; current meter: displays DC Load current in four scales 0 to 25A / 10A / 5A / 2.5A; load ON / OFF: toggle switch to turn ON and turn OFF load; load ON indication: green LED to indicate Load ON; load input 4: position terminal board for HI input and LO input and current limit for each TB is 15 A and operating temperature 0 degree C to 50 degree C; Size: 205mm(W) X 195mm(H) X 180mm(D); and weight 3 Kgs. No other AC or DC source is required to operate this self-powered electronics load specifications subject to change without notice. Applications: for testing of batteries in the field; checking of performance of Solar panel in the field; testing of fuel cell; testing of DC power supply on site or in lab; used with fixed load to provide higher variable load to batteries or power supplies.