• Hensel Electric India Private Limited

Mi Distribution Boards

The system comprises with five standard box sizes within a grid of 150mm that can be used as individual enclosures and can be combined as well in any directions. Individual enclosures as well as the assemblies are having a degree of protection IP65 which corresponds to Jet water proof and dust proof as per IEC standards.
 
The most important advantages for Hensel Mi Boards are that they are Full Type Tested as per IEC 60439 – 1 and are totally insulated and shock proof since individual enclosures are made out of polycarbonate. As a result, they are completely safe and are meant for the safety of even an unskilled person working carelessly on a project or maintenance site.
 
The Hensel Mi Board uses a unique wall gasket, made of engineering plastic, for the assembly and connection of two box walls due to which the complete board becomes IP65 and hence it makes the complete system ready to be used outdoor for any applications.
 
Due to the modular nature of the system, future expansion becomes very simple and easy. Specially, when there is a necessity to add extra lighting or control or power circuits in an already installed Hensel Board, this feature comes very handy. Also, the basic enclosures are standard and are readily available due to which a complete assembled panel can be made in no time in comparison with the conventional sheet steel panel. The fabrication for the conventional panel itself takes a real long time when the minimum degree of protection is IP55. In comparison, a Hensel Mi Board can save 3/4th of time spent in assembly and installation.
 
The bus bar system in the Hensel Mi Board is unique. A specially designed clamping terminal with a spring tension is used to clamp the solid copper bus bar and the flexible wiring band (made of tinned copper) due to which no holes or openings are required for connections. This eliminates any or all the weak points from where a flash over or sparks can occur due to loose connections thereby making the Hensel Mi Board a foolproof system.
 
Large wall openings enable the wiring within the distribution boards and cable entry is provided via metric knock outs which are available on all the sides of box walls and also via flanges and cable inserts up to 74 mm cable diameter.
 
Wall fixing is right away in the boxes and also can be through external brackets for individual enclosures. For the Hensel Mi Board, fixing can be direct wall mounting or pedestal mounting or as per the choice given by a customer.
 
 
Typical applications: lighting distribution board, power distribution board, motor control centre, power control centre, feeder pillar panel, energy metering panel, construction panels and many more…