• Pathak Industries (KOL )

Hydraulic Hacksaw Machine

Pathak Industries (Kol), an SSI Unit, offers Hydraulic Hacksaw Machine.

SAW FRAME - This is of rigid construction and runs in prismatic guide ensuring a square and parallel cut. This cut takes place on the draw stroke and the blade is hydraulically lifted out of contact with workpiece on the forward stroke to prevent wear or the blade and can cut metals of all kinds and strength.

FEED - Two levers are provided at the dash pot one regulates the rate of feed while the other enables the bow slide to be raised or forwarded hydraulically bow raised automatically and motor switched off on completion of the cut.

BED - The Bed is of large proportion provided with guide ways for the vice for clamping the material. Vice is of rigid construction. One jaw remains fixed and the other can be adjusted according to the materials to be cut.

ELECTRICAL EQUIPMENT - A direct on-line push button starter can be fitted which incorporates and adjustable trip mechanism which stops the machine as soon as the blade is clear from the work. Non productive time is reduced a minimum.

DRIVE - Power is supplied by a suitable electric motor through Vee-Belt which are full adjustable for tension all drive mechanism being totally enclosed.

SPEED - The incorporation of two-speed driving mechanism allows for the most suitable speed to selected for material being cut.

COOLANT - The coolant tank is totally enclosed in the machine base and a constant Speed Pump supplies coolant to the saw blade through a stay put pipe and tap.

OPTIONAL ACCESSERIES - Bar Support Stand, Tilting Angular Vice, Hacksaw Blade, Electrice Coolant Pump, Electrice Motor, Starter, Vee Belts