Schedule a Call Back
Oil Milling Plants
Oil Milling Plants
Oil milling is an art. Care has to be taken while expelling the oil to ensure maximum oil recovery with minimum power consumption; cake should not be burnt protein should not be damaged, color fixation of oil should not take place, minimum heat should be generated while expelling; moisture should not find its way with oil, filtration should be in such a manner that no cake particles remain in contact with oil, thus FFA of oil should not increase. Seeds should be cooked properly and conveying should be provided to make- operation totally mechanical. TROIKA design takes care of all these aspects, added is the decades of experience. Well-designed plant layouts, trouble free maintenance, ease of operation, low utility consumption makes TROIKA oil mill a viable proposition. Oil milling can be only prepressing in which case seeds are lightly pressed, and which leaves about 14% to 18% oil in the pressed cake. This method results in higher capacity; lower power consumption, lower wear & tear / maintenance. But it als
