Narrow-Section V-Belts

• Gates Unitta India Company Private Limited
• Sriperumbudur

Narrow-Section V-Belts

Gates Unitta India Company Pvt Ltd has launched premium Narrow-Section V-Belts for heavy-duty industrial drives. Quad-Power® II is Gates’ top-of-the-range narrow-section V-belt for heavy-duty industrial drives. It has been developed to replace traditional V-belts on applications where space and weight savings are critical: Quad-Power II is the V-belt with the highest power capacity. Improved resistance to outside bends allows the use of back idlers. The unique notch profile makes the belts run smoothly in the pulley grooves. Quad-Power II belts can also be used on small pulley diameters. With Quad-Power II less belts are needed than with conventional belts in order to achieve the same service life. They also allow the use of very small pulleys, reducing both costs and weight. For the same centre distance, smaller diameter pulleys and shorter belts can be used.
Construction:

• Raw edge construction, ground
• Narrow cross-section
• Optimised notch profile reduces and evenly distributes thermal and bending stresses
• Notch depth is in proportion to the cross-section to ensure perfect stability
• Precision-ground sidewalls give a uniform wedging action
• Fibre-loaded elastomeric compound withstands heat, ozone and sunlight and offers an improved cord support; flex-bonded polyester tensile cords are vulcanised as one solid unit, increasing the belt’s resistance to tensile and flexing forces
• Double Flex-Weave® textile backing protects the belt against wear – especially when back idlers are used
• Cross-cords improve belt stability
• The belt will not catch fire from heat build-up, even with severe slippage
• Static conductive (ISO 1813)

• The most powerful belt in Gates’ industrial V-belt range
• Excellent performance/cost ratio
• Increased transmission efficiency as compared to other V-belt types
• Cost and space savings
• Savings on pulley cost
• Maximum belt life reducing maintenance time
• Match system – all sizes meet Gates UNISET tolerances
• Cost and space savings guaranteed