Schedule a Call Back
Oil Expeller
Oil Expeller
United Oil MIll Machienry And Spares Pvt Ltd offers Oil Expeller. UMAS VIP MK-5A Oil Expeller, all steel fabricated, with improved triple reduction helical gear box with self lubrication arrangement, vertical hinged cast steel chamber, self contained conveyor for oil, alloy steel water cooled main worm shaft, fitted with hard faced worm assembly. UMAS 5-stage Steam Cooker, fitted with vertical gear box and independent motorized blower for aspiration.
- All Steel Fabrication and Improved Design
- For perfect alignment and stability.
- Vertical Hinged 120” Long Pressing Box
- Entirely eliminates the difficult task of removing box for relining or for replacement of worms, which saves lot of time and labour.
- Steel Casted Chambers
- Reduces time and labour for relining of Cage Bars
- The main Shaft
- Of the Expeller is water cooled and is of alloy steel construction, fitted with High Pressure Worms, hard faced, with a highly wear resistant alloy. The worm arrangement has been designed to expel the maximum recoverable oil from oil bearing materials.
- Shaft Withdrawal
- The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings.
- Compressor
- The feeding hopper has a vertical feed device, which compacts the seed coming from the heating kettle, and press it uniformly into the cage.
- The Cake at the Discharge end
- Of the main cage is controlled by manually operated arrangement which is so simple that the choke gear is independent of the main drive and there is no possibility of a sudden load being placed on Expeller motor. A motorized system can also be provided at an extra cost.
- An Oil Discharge Conveyor
- Is fitted along the full length of the Expeller having right and left hand flights to deliver the oil to central point. The drive is from the main Gear Box.
- Power
- The power required to drive the “UMAS” VIP MK-5A EXPELLER is 150 HP for single pressing/pre-pressing.
- Gear Box & Lubrication
- An improved triple helical parallel shaft gear unit made from most suitable special steel, running in oil bath. All shafts run on antifriction bearings. Drive housing is oil tight and dust proof, totally enclosed design and is fitted with level indicator. A self contained lubrication arrangement has been provided.
- Capacity
- The crushing capacity of “UMAS” VIP MK-5A Oil Expeller is 50/60 tons per day in single pressing and 150 tons per day in pre-pressing depending upon the materials being crushed and the working conditions.
Products from United Oil MIll Machienry And Spares Private Limited
Verified
Verified
Quartz Membrane Micronic Filters
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Vertical Pressure Leaf Filters
Deburring, Drilling, Boring, Tapping and Threading Machines
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines