• Traxit Engineers Private Limited

Rubber Cutter Dissolver

Traxit rubber cutter cum dissolver finds effective use in the manufacture of adhesives, sealants and caulking compounds. When chunks or strips of rubber or any solid material is broken down in the presence of a solvent, there is increase in specific area which results in faster dissolution, reaction etc. This principle is used effectively by RCD.

The basic construction consists of a high speed serrated cutter operating in conjunction with serrated stator. Both the rotor and the stator have large keen edged teeth opposing each other. The rotor is mounted on an adequately sized shaft and the stator is supported by means of three or four tie rods. The whole assembly is installed in a closed vessel. The vessel is filled with solvent, and the rubber chunks or strips, which have to be dissolved, are then added to the solvent.

The chunks or strips of rubber get caught in between the rotor and the stator and are reduced to crumbs by the intense action of the opposing teeth and then quickly dissolved in the solvent by the high speed impelling action of the revolving cutter.

For high viscosity product the RCD works in conjunction with a slow speed anchor type open mixing element. This slow speed impeller has an independent drive and the speed as necessary can be controlled. This sweeps the vessel and moves the solid material into the high speed cutter - stator assembly