PFERD burrs lasts longer and does not stick

  • Industry News
  • Sep 29,22
PFERD utilises wear protection based on a thin-film coating, which enables it to achieve a significant increase in tool performance.
PFERD burrs lasts longer and does not stick

Milling work such as deburring, levelling, milling out cut-outs or preparations and reworking weld seams involves highly productive processes. There are a wide range of tools optimized to the specific materials and applications. Nevertheless, when machining steel or stainless steel (INOX) premature wear or – for long chipping and lubricating materials such as soft aluminium alloys – clogging of the tool impairs the efficiency and functionality of burrs.

“Coatings provide a remedy for this”, explained Thomas Plömacher, Product Manager responsible for burrs at PFERD Tools, a manufacturer of tools for work on surfaces and for cutting.

PFERD utilises wear protection based on a thin-film coating. “This enables us to achieve a significant increase in tool performance”, Plömacher said. Although the coatings are just a few microns thick, they are harder than steel. “These thin film coatings are ideal because of their extreme wear resistance, low friction and chemical resistance”, the PFERD product manager explained. The optimum coating depends primarily on the purpose.

“On burrs for steel or stainless steel (INOX), for example, our HICOAT FEP coating gives a high surface hardness and wear resistance. It improves chip removal and anti-adhesion characteristics, increases temperature resistance and tool life, and also allows higher cutting speeds”, Thomas Plömacher said.

All in all, this leads to an improvement in performance of up to 30%. “That is why we are now offering our material-specific optimised cuts for steel (STEEL) and stainless steel (INOX), as well as our ALLROUND cut featuring our well-known HC-FEP HICOAT coating.”

For long chipping and lubricating materials such as aluminium other coating properties are most effective. “Here the primary aim is to prevent clogging of the burr. In many cases, tools do not even get to the stage where they start to wear because the chip spaces get clogged during machining and the burr no longer works,” said Plömacher.

The Marienheid-based manufacturer also offers coated solutions to deal with this issue. “We use the HC-NFE coating optimised for non-ferrous metals. It improves the anti-adhesion characteristics, reduces the heat load, ensures effective chip removal and thus prevents clogging of the burr, which leads to a longer tool life overall and maximises the stock removal rate,” the product manager explained. These perfectly balanced tools also extend the life of robotic spindles.

The new PFERD tungsten carbide burrs are also optimised in terms of ergonomics and efficiency. PFERDERGONOMICS recommends burrs with STEEL, INOX and ALLROUND cuts as an innovative tool solution for convenient working with significantly reduced vibrations and less noise. PFERDEFFICIENCY recommends burrs with the STEEL, INOX, ALLROUND and ALU cuts for long, low-fatigue and resource-saving work with perfect results in short times. These perfectly balanced tools also extend the life of robotic spindles.

Related Stories

Other Industrial Products
FYH Japan introduces all-new range of deep groove ball bearings

FYH Japan introduces all-new range of deep groove ball bearings

Since 1950 FYH - the largest manufacturer of mounted bearing units in Japan - has prioritised quality, aiming to offer efficient, precise, and affordable solutions to a diverse array of industries.

Read more
Chemicals, Lubricants & Raw Material
Emerging technologies in electric vehicles are reshaping lubricant needs

Emerging technologies in electric vehicles are reshaping lubricant needs

In this interview, Ravi Chawla, MD & CEO, Gulf Oil Lubricants India Ltd, highlights how his company is developing innovative, biodegradable products to meet the evolving needs of industrial cust..

Read more
Machine Tools & Accessories
IMTEX Forming 2024 gets enthusiastic response from the manufacturing community

IMTEX Forming 2024 gets enthusiastic response from the manufacturing community

The Indian machine tool industry needs to produce high-precision machines and meet the current demand of producing sophisticated parts in various metals like titanium and others, said C K Venkataram..

Read more

Related Products

Automatic Back Spot Facing Tool

MACHINE TOOLS, POWER & HAND TOOLS

Shenoy Engg Pvt Ltd offers automatic back spot facing tool.


Read more

Request a Quote

Plas in-line Rotary Pipe Cutters

MACHINE TOOLS, POWER & HAND TOOLS

Arizona Tools Company offers a wide range of in-line rotary pipe cutters for plastic pipe.

Read more

Request a Quote

True Peel® PE Prep Tools

MACHINE TOOLS, POWER & HAND TOOLS

Arizona Tools Company offers a wide range of True Peel® PE prep tools.


Read more

Request a Quote

Hi There!

Now get regular updates from IPF Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Industrial News on Whatsapp! Enjoy

+91 84228 74016

Reach out to us

Call us at +91 8108603000 or

Schedule a Call Back