• Sri R V Machine Tools

Hydraulic semi automatic turning machine

Sri R V Machine Tools manufactures semi automatic turning machines that allow adjustment of rate of speed as per requirements The hydraulic power of the machine activates the slides smoothly. Selected switches modify the built-in programs while a separate provision is available for emergency stop with reset push button. The machine equipped with clutch and brake device stops spindle at short intervals while the motor runs continuously. Hydraulic power operated chuck is adapted with 2-speed motor and a gearbox drive with rating 100 to 2500 RPM. Application: Industrial applications Technical specifications: Swing over slide - 300mm Spindle diameter - 70mm Dimension of the slide (longitudinal) - 450/200 mm; Cross - 400/200 mm Travel of slide - Longitudinal ? 100 mm; Cross - 200 mm Angle of swing of slide - Longitudinal: +/-25 degrees; Cross - +/-25 degrees Feed rate of slide: Infinitely variable Rapid Traverse - 5000 mm/min Feed - 0-4000 mm/min Hydraulic system: Diameter of cylinder ? 40 mm Capacity of tank ? 80 ltr Displacement of pump at 50 bar - 10 lit/min Pressure applied - 30 to 40 Kg./cm2 Pump motor: 0.75 Kwatt, 440 volt, 1400 RPM Spindle motor 2 Speed, 1.5/2.2 kwatt, 1400-2800 RPM, 440 Volt Space L*W*H=1600*1000*1500 mm3 Special features: Twelve steps of spindle speed can be chosen Standard safety device with complete door closing system Motor fully protected by over load circuit breaker Programmable Logic Controller (PLC) Stackable limit switches