• Virap Sales and Services

Smart Measurement Transducer, CARBO 1000

Virap Sales & Services offers a Smart Measurement Transducer, Carbo 1000, manufactured by MESA Electronic GmbH, Germany. The Carbo 1000 performs as a measurement transducer for use with a wide range of sensors to determine the residual oxygen and calculate the C-level at the L-sensor, the O2- sensor and the CO2 analyser. The Carbo 1000 processes the incoming signals from all sensors in the system, calculates the desired baseline value, and stores these data in a predefined or symbolized data block in the PLC (programmable logic controller). Data blocks are used to set the configuration and error processing for the Carbo 1000. This makes it easy to integrate the Carbo 1000 into existing programs and to further process the obtained data. It communicates directly via the "Siemens Backplane Bus Protocol", thus allowing the use of the PLC from the Siemens Simatic S7-300 family of products. There is no need for additional components. Despite the compact design of the Carbo 1000, galvanic isolation between all input and output circuits has been achieved. The Carbo 1000 is ready for use in an oven zone or it may be extended by up to five modules inside a longer housing.