Schedule a Call Back
Distributed Charger Control System (DCCS)
Distributed Charger Control System (DCCS)
The Distributed Charger Control System (DCCS) is a complete system for controlling multiple chargers. The system not only controls but also registers data from each battery bank at programmed events. This gives a complete control solution for charging/formation process. Operator can monitor, control multiple circuits from a single PC using friendly Windows-based software. Current, voltage and/or temperature can be controlled with time, AH, WH, temperature and/or voltage as terminating conditions.
- Each DCCS controller can support up to 24 circuits
- Up to 31 DCCS controllers can communicate with a centralised PC using RS 485 party line subject to 240 circuits in all
- Accuracy – +/- 0.2 % typical (depends on the sensors used)
- Windows based PC software for program editing, down loading, monitoring of circuit parameters, registration, etc
- Program storage 60 steps per program; number of programs on PC-1000
- Data registered is available in CSV format, which can be used with any database software such as MS Excel, etc
- Step commands – charge, discharge, pause, charge/discharge ramp, registration On/Off, DAT, end of cycle/EOF, set amp-hr, set watt-hr loop
- Step control parameters – current, voltage and temperature (any two parameters can be programmed in one step)
- Step termination parameters/program abort parameters – voltage, amp Hr, watt Hr, and temperature with less than or greater than option
- Loop count, time (any one or two parameters can be programmed and action will be effected on whichever is effective earlier)
- Data is also registered automatically on user interruption, power resume, and other errors
- Local storage of 40 programs which can be used for offline operations
- ; maximum allowable current is programmable for each circuit; single step can be programmed and executed from LCD MMI and Start, Stop, and Continue selected circuits from LCD MMI also.
Distributed Charger Control System DCCS
Distributed Charger Control System
Distributed Charger Control Systems
Charger Control System
Distributed Charger Control
Charger Control
Asia Automation Pvt Ltd
Asia Automation
DCCS
Products from Asia Automation Private Limited
Verified
Air Jet Weaving Machine Controller
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Sensor Actuator Interface Control System
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines
