• Bhoomi Analyzers

Extractive Flue Gas Analyzers

Bhoomi Analyzers offer Extractive Flue Gas Analyzers, BI 7000. It is an online extractive analyzer for difficult flue gas monitoring. It uses Electrochemical & IR principle to measure up to 8 pollutant species in a single self-contained unit. Sophisticated Sample Conditioning system is used for the sample gas to be cleaned and dried to very high standard prior to analysis. It provides the facility to automatically check and control zero using clean, dry compressed air or N2. Where independent span checks are required, bottled gases of known concentration can be injected directly into the measurement chamber. It can be extended by numerous external system components to form a complete analysis system. It is used for measuring Oxygen; Carbon Monoxide; Carbon Dioxide; Nitric Oxide; Nitrogen Dioxide; Sulphur Dioxide; Hydrogen Chloride; Ammonia; Chlorine; Hydrogen Sulphide. Its features are: Up to eight gas species; Continuous monitoring; Combustion efficiency calculation; Programmable for 22 different fuels; Full range of outputs & alarms; Data logging via pc software package; Auto calibration verification facility; Self diagnostic checks; Modular system, can increase gas species from minimum three up to maximum eight; Technical Specifications: Accuracy: ± 2 ppm for CO, NO, NO2, SO2, HCL & 0.2% for O2, CO2; Process Temperature: dew point to 600 °C (above 600°C by arrangement); Ambient Temperature: -10°C to 50°C; Sample Line: 3m Standard (up to 15m available); Measurement Units: ppm, mg/m3 (measured) & mg/Nm3 (normalized); Panel - Wall Mounting (Dimension) 650(W) x 800(H) x 450(D); Standing Panel (Dimension) 800 x 2000(H) x 600(D).