Schedule a Call Back
General Purpose Flowmeter
General Purpose Flowmeter
The Flowmeter measures liquid, gas or steam flow rates in horizontal or vertical pipelines. Armor-Flo™ meters handle fluids that cannot be measured with the See-Flo® due to clarity, pressure or compatibility with wetted materials. The wedge shape of the meter body housing provides the Armor-Flo™ with the same self-cleaning characteristics as the See-Flo® Teflon® encapsulated cobalt magnets are used to couple the flow isolated indicator with the vane. These features emphasize simplicity and reduce maintenance.
- Water
- Liquids with viscosity up to 300 Cst.
- Air and other gases
- Vacuum service
- Steam
- Accuracy: ±2% full scale
- Repeatability: ±1% full scale
- Scales: Direct reading
- Resolution: Maximum-30 division/Minimum-15 divisions
- Rangeability: 10 to 1 turndown
- Materials of Construction:
- Housing: Aluminum,brass, 70/30 copper/nickel, 316 stainless steel, Hastelloy® C-22
- Shunt: As housing or carbon steel
- Window: Tempered glass or polycarbonate
- Vane: Cobalt/chromium/nickel alloy or Hastelloy® C-22 with Teflon® encapsulated magnet
- “O” rings: Buna-n, ethylene propylene, Viton®, Kalrez® or Teflon®
- Piping Connections:
1⁄2" to 1" NPT Female
11⁄4" to 4" NPT male
11⁄2" to 3" Tri-clamp
11⁄4" to 6" Grooved
11⁄4" to 6" Beveled
1⁄2" to 6" 150# /300# RF/FF ANSI - Flanges (carbon stl)
1⁄2" to 6" 150# RF ANSI - Flanges (stainless stl)
1⁄2" to 6" 150# RF ANSI - Flanges (aluminum)
1⁄2" to 6" 150# FF ANSI - Flanges (brass)
- Pressure Limits:
1 Housing (aluminum)
0, 1 or 5 Shunt-200 psig (13.8 bar)
2 Housing (brass)
0 Shunt-400 psig (27.6 bar)
2 or 5 Shunt-200 psig (13.8 bar)
6 Housing (316 stainless stl)
0 Shunt-400 psig (27.6 bar)
5 or 6 Shunt-200 psig (13.8 bar)
7 or 8 Shunt-400 psig (27.6 bar)
8 Housing (high pressure 316 stainless stl)
0 Shunt-1000 psig (69 bar)
9 Housing (Hastelloy® C-22)
r0 Shunt-400 psig (27.6 bar) - Temperature Limits:
-23 to 85°C (-10 to 185°F) - with Teflon® o-ring at constant temperature conditions
-23 to 121°C (-10 to 250°F)
with buna-n o-ring
-23 to 204°C (-10 to 400°F)
with Viton®, Kalrez® or ethylene propylene o-ring
- Instantaneous rate measurement.
- Measure opaque fluids.
- More exotic materials of construction.
- Use in horizontal or vertical piping systems.
- Individually calibrated for fluid and operating conditions.
- User selectable 10:1 turndown flow ranges. (See “Meter Rangeability Sizing Tablesâ€)
- User selectable units of measure-including dual units of measure.
- No floats to get stuck, tubes to break or dynamic seals to leak.
- Low pressure loss.
- Simple design with few parts for long service life.
Products from ERDCO Engineering Corporation
Products from MACHINE TOOLS, POWER & HAND TOOLS Category
Verified
Verified
Versatile Machining Capability Through Ram Type Milling & Grinding Heads
Deburring, Drilling, Boring, Tapping and Threading Machines
Verified
Verified
Polygon Turning Machine - TPT-5S, TPT-5ST
Deburring, Drilling, Boring, Tapping and Threading Machines