Flowmeter with Transmitter

• Accuracy: ±2% full scale
• Repeatability: ±1% full scale
• Scales: Direct reading
• Resolution: Maximum-30 division/Minimum-15 divisions
• Rangeability: 10 to 1 turndown
• Transmitter:
  Accuracy: ± 2% full scale
  Repeatability: ± 0.5% full scale
  Permissible load: Rmax= 750
  Temperature limits: 0-85°C (32-185°F)
  Environmental: NEMA 4/NEMA 4x
• Materials of Construction:
  Housing: Aluminum, brass, 316 stainless steel, Hastelloy® C-22
  Shunt: As housing or carbon steel
  Window: Tempered glass or polycarbonate
  Vane: Cobalt/chromium/nickel alloy or Hastelloy® C-22 with Teflon® encapsulated magnet
  “O” rings: Buna-n, ethylene propylene, Viton,® Kalrez® or Teflon®
• Piping Connections:
  1⁄2" to 1" NPT Female
  11⁄4" to 4" NPT male
  11⁄2" to 3" Tri-clamp
  11⁄4" to 6"Grooved<
  11⁄4" to 6" Beveled
  1⁄2" to 6" 150# /300# RF/FF ANSI
  Flanges (carbon stl)
  1⁄2" to 6" 150# RF ANSI
  Flanges (stainless stl)
  1⁄2" to 6" 150# RF ANSI
  
• Flanges (aluminum)
  1⁄2" to 6" 150# FF ANSI
• Flanges (brass)
  15 to 25 mm DIN 2999/BS21/ISO R7
• Female threaded
  15 to 150 mm DIN PN 10Flanges
  (316 stainless stl & carbon stl)
• Pressure Limits:
  1 Housing (aluminum)
  0, 1 or 5 Shunt-200 psig (13.8 bar)
  2 Housing (brass)
  0 Shunt-400 psig (27.6 bar)
  2 or 5 Shunt-200 psig (13.8 bar)
  6 Housing (316 stainless stl)
  0 Shunt-400 psig (27.6 bar)
  5 or 6 Shunt-200 psig (13.8 bar)
  7 or 8 Shunt-400 psig (27.6 bar)
  8 Housing (high pressure 316 stainless stl)
  0 Shunt-1000 psig (69 bar)
  9 Housing (Hastelloy ® C-22)
  0 Shunt-400 psig (27.6 bar)
• Temperature Limits:
  0 to 85°C (32 to 185°F)

• Instantaneous local flow rate measurement.
• Local flow rate indication requires no power.
• Flow proportional signal output.
• Broad range of materials available.
• Use in horizontal or vertical piping systems.
• Individually calibrated for fluid and operating conditions.
• User selectable 10:1 turndown flow ranges. (“See Meter Rangeability Sizing Tables”)
• User selectable units of measure-including dual units of measure.
• No floats to get stuck, tubes to break or dynamic seals to leak.
• Low pressure loss.
• Simple design with few parts for long service life.