Schedule a Call Back
Arjay Engineering Limited
Dual Gas Detectors
The EC-Gold Dual is ideal for any size facility where one or multiple gases need to be monitored. More than 30 years of gas detection experience has contributed to this highly functional detector. read more
Floating Oil Alarm
The unique 9830-HCF float design uses HF capacitance to continuously monitor the upper surface of the water. The float allows the sensor to follow the water level changes typical of industrial sump read more
Level Alarm Switch
The 9820 and 9830 provides an economical means to alarm on the high or low condition of a liquid or bulk solids vessel. The 9820 electronics are mounted directly onto the probe for easy and compact read more
Level Monitor and Control
The unique design of the level-Ease controller allows 2 capacitance probe inputs to be monitored simultaneously. Scanning model allows up to 80 tanks to be monitored. The capacitance probe mounted in read more
Level-Ease Monitor
This unique level system provides complete flexibility for one or more tank levels in one package. Over 30 years of Arjay's field proven HF capacitance technology has been applied to the Level-Ease read more
Oil in Water Monitors
The HydroSense 2410 is the engineered combination of three unique designs by Arjay. The sensing chamber contributes a continuous controlled water sample while the optical sensor package hovers abov read more
Oil/Water Separator Monitors
Once the 2114-OWS is installed into the filled separated, a quick calibration takes place to tune the probe. As oil separates to the surface and displaces clean water out of the separator, read more
Open Channel Flow Monitors
The 2114-OCF provides an economical means to monitor the flow within defined channels and streams. The control unit can be mounted safely remote from the stream channel up to 1 km away usin read more
Plugged Chute Detectors
HF capacitance technology has been applied to the 9830-PCD plugged chute detectors. The flush mount sensor continuously monitors the change from a normal material chute condition to a plugged condi read more
ppm Oil in Water Monitors
A solvent extraction using hexane or pentane is used to qualify the water sample to EPA and ISO methods. This removes the targeted oils into the solvent. The sample is then placed directly into the read more
