• Miraj Electrical & Mechanical Co Private Limited

Weaver weld automate

Miraj Electrical & Mechanical Co offers Weaver Weld Automate, a fully automatic CO2/MIG-MAG welding system weighing only 11 kg. Mounted on magnetic flexible tracks with permanent magnets, this is suitable for vertical up, horizontal, downward, and other positional welding with weaving facility and dwell control facility on either side to avoid undercut with its controller and wave amplitude control.Features: input 220 V AC, single phase 50 Hz; fully transistorised, digital electronic control, fully swivelled to weld fillet welding from 0 to 45? by installing MIG torch on either side of the weaver weld; flexible track length 9 feet; actual welding travel distance 6 feet and each track can be coupled with additional extra track of 9 feet for desired distance; motorised on the track with anti drifting facility with positive drive holding teeth steel hardened, 0 to 44? for straight, bevel and fillet welding; min 0.1 mm to max 50 mm waves amplitude (weaver} setting with thumb wheel setting; 0 to 5 secs dwelling welding time can also be set infinitely variable. Controller with waves amplitude control; On-Off push button; dwelling time control, travel speed control with reverse/forward changeover switch; magnetic clamps to hold the controller; control cable 5 metres between controller to weaver field; and wire feeder with four wheel positive drive quick release and quick change over type with magnets to hold wire feeder on vertical to horizontal plates. Power source: Model MCW 600 A fully thyristorised controlled power sources, constant voltage type with analogue amp and volt meter; torch: Model CS 45-3 torch with swivel neck, ergonomically designed handle. Euro connection with flow meter and regulator including heater to weld with solid wire or flux cored wire either with CO2 gas or mixed gas. The system is simple to set up; increases productivity manifold; eliminates welder qualification/certification; and reduces man power.