• Mech-India Engineers Private Limited

Diamond Burnishing Tools

Mech-India Engineers offers diamond burnishing tools, these are completed with a selected diamond stem and are suitable for carrying out the burnishing of turned or ground surfaces on many of metals for achieving high level finishing i.e. 0.05 to 0.20 ?Ra. It is possible to burnish cast iron to get surface finish 0.2/0.4 ?Ra. The tools are compact and with shank of 20 or 25 mm square. Thus the ideal tools are also used on small lathes and are used on traditional or CNC lathes. After having installed, the tool is on the tool-post, so that the diamond gets in touch on the middle of the part, obtaining an angle of 90 with respect to the surface to burnish. After the tool gets in touch with the surface to be burnished, put the spring under pressure. The feed should be 0.07/0.1 mm per revolution & the speed same as turning speed. The tools have a precision diamond stem mounted on the top. It is possible to burnish materials with hardness up to 60 HRc, obtaining a finishing of 0.07/0.15?Ra.