• Das Precision Machine Tools Private Limited

Spring End Grinding Machine

Thane-based DAS Precision Machine Tools Pvt Ltd manufactures automatic spring end grinding machines that are available in two different versions with different grinding cycles. Model SEG-3 is normally available in crush grinding cycle type. Springs of bigger wire sizes can be ground better with down feed cycle. It also gives higher production with minimum handling of the springs. Model SEG-12 is available with either crush grinding cycle or down feed grinding cycle. The two dressing spindles (one for each grinding wheel) are mounted on ball bearing and thrust bearings. Due to this the life of the dresser is increased multifold. The changeover of the dresser disc can be done easily and quickly. For replacing wheels, a special attachment is provided, which makes it easy for a single operator to carry out the change. The grinding wheels are screwed on to the back plates, to save time and labour during replacement. The electrical system is of reliable material, and all operations are performed through a PLC. Reverse rotation on the loading plate is prevented with the help of a slip ring in the drive. This avoids accidents, and protects the springs from damages. The supporting plates, below the loading plate, are case hardened and are provided with slots for adjusting their position with respect to the bottom-grinding wheel. This helps in compensating for any unevenness in the diameter of the grinding wheels. The other models available are SEG-1 and SEG-12. Technical specifications: * Grinding process: crush * Wire diameter: 0.3mm to 3.0mm in single pass, up to 5.0mm in multipass * Spring external diameter: 3 to 40mm * Spring length: 5 to 150mm * Wheel diameter: 400 OD x 75 ID x 55 W (mm) * Feed plate diameter: 420mm * Feed plate drive: 0.25 HP, DC motor * Feed plate speed: 1 to 5 RPM (infinitely variable) * Wheel drive motor (each): 3HP; 1,440 RPM; 440V; 50Hz; 3 phase