• Ell Ess Engineering Private Limited

Water Filters

Ell Ess Engg introduces water filters based on simple and cost effective design offering substantial advantages over other existing devices. The filter housing is accurately manufactured from high grade steel, while the filter element is all metallic non-clog type. Inlet and outlet of the filter is maintained on the same axis facilitating easy installation of the filter. Water flow takes place from inside to outside with respect to the filter element retaining the solid/dirt particles on the inner surface of the element. This surface is periodically cleaned in place by nylon brush mechanism either motorised or operated manually. Slurry after washing is drained through an exhaust valve. General specifications are: filtration degree: up to 50 microns; flow rate: up to 700 m3/hr; maximum operating pressure: 10.0 kg/cm2g ; and material of construction: filter housing in CS, SS304, 304L, 316, 316L; filter element in SS 304, 304L, 316, 316L. Advantages are: easy to install in-line filters; excellent cleaning of filtration surface by brush mechanism; least requirement of cleaning fluid; long life for filter element due to non-clog type; and low pressure drop even at higher flow rates.