Schedule a Call Back
Motor and Control
Motor and Control
BLDC Motors and Control gives significantly improved performance due to the number of poles and high frequency operation. The motor is designed on 8 pole configuration and the control is built on the rear side of the motor. Necessary heat sink are fabricated / mounted on the unit for handling heat transfer.
There are 2 basic models of motors – one has a power output of 375W & is rated at 0.8 N-m while the other has a power output of 750W & is rated at 1.5 N-m. A local host based on Micro-controller can be used to manually control Speed & Direction of the motor. These motors are available with integral gearbox combinations also.
- Industrial Automation
- Process plants
- Winding machine
- Garment factory
- General purpose control
- Continuous operation
- High efficiency (>80% for Motor + Control)
- Low EMI / EMC
- Low Inertia
- Multi-drive networking
- Local Host Control
- Isolated Interface
- 2 modes of operation - Velocity mode: Direction, Speed & Acceleration curve (plotted against time scale) can be programmed and Motor works according to programmed profile. Position mode: Speed & Acceleration curve (plotted against time scale) can be programmed, Absolute or relative position(s) can be programmed and Motor works according to desired position(s).