Welding Rectifiers

• BTH Electrics (Guj ) Private Limited
• Ahmedabad

Welding Rectifiers

BTH Electrics (Guj) offers BTH Series Welding Rectifiers made out of copper/aluminium and CRGO stampings, designed to provide smooth DC welding current where 3-phase, 50 Hz, AC mains power is available at voltages ranging between 415 to 440 V. BTH Series rectifier sets are suitable for manual arc welding particularly for the welding of: pipes in all positions where welds of high radiographic standards are required, non-ferrous metals, low-alloy, corrosion, heat and creep resisting steels, and mild steel at sites where AC welding power may be unsuitable. The sets may be supplied with: (a) suitable ammeters and voltmeters for direct reading of the welding current and voltage; and (b) a remote current control device as optional extras. Salient features: designed for rugged use in all environments; half wave and full wave design as per requirement; power source designed for extra smooth current by specially designed chokes and current from 5 A to full range; suitable for almost all electrodes; high speed fan for more cooling; specially designed single PCB design instead of many cards; and meter provided ‘V meter’ on request. Specifications: Models – BTH300 – BTH400 – BTH600; input (±10%) supply voltage – 415/440 V AC – 415/440 V AC – 415/440 V AC; phase/frequency – 3-phase, 50 Hz; type of cooling – forced air; insulation class – F/H; primary current max rated – single operator 22 A – 28 A – 44 A, and at max rated kVA – single operator 16.5 A – 20 A – 34 A; input cable section – single operator (Cu) – 10 mm2 – 10 mm2 – 16 mm2; open circuit voltage (max) – 75-85 V; welding cable – 50 mm2 – 50 mm2 – 95 mm2; range – 5-300 A – 5-400 A – 5-600 A; protection class – IP23; overload protection – thermal; max continuous hand weld current at 60% duty cycle – 300 A – 400 A – 600 A; max continuous auto weld current at 100% duty cycle – 300-400 A (approx); and weight – 75 – 200 – 240 kg.