Temperature Controllers

• Omron Electronics LLC
• Schaumburg

Temperature Controllers

• ·       Improved input accuracy for terminal block models:

·       Thermocouple: (±0.3% PV or ±1° whichever is greater) ±1 digit

·       Platinum resistance thermometer: (±0.2% PV or ±0.8° whichever is greater) ±1 digit

·       Analog input: ±0.2% FS ±1 digit

·       Improved current output resolution – approximately 10,000

·       Alarm outputs rating increased to 3A at 250 VAC

·       For models with added external communication (RS-485), set-up cable (E58-CIFQ1) can now be used at the same time

·       Additional Parameters / Functions:

·       Manipulated Variable limiter

·       40% AT (auto-tuning)

·       Auto-tuning function for cooling gain during heating and cooling

·       Switching direct/reverse operation by event/operation command

·       PV change rate alarm

·       Universal thermocouple sensor inputs, including types W, PL II

·       Serial communications via Modbus 1 data 2 byte mode

·       Over-current alarm

·       Square root extraction function (only for analog input models)

·       PV/SV status display function

·       Control output cycles can be counted for preventive maintenance.
Trigger an alarm for controller replacement based on monitoring of relay use.

·       Enhanced machine aesthetics with black or silver models

E5AN & E5EN 1/4 & 1/8 DIN Temperature Controllers

·       Improved input accuracy for terminal block models:

·       Thermocouple: (±0.3% PV or ±1° whichever is greater) ±1 digit

·       Platinum resistance thermometer: (±0.2% PV or ±0.8° whichever is greater) ±1 digit

·       Analog input: ±0.2% FS ±1 digit

·       Improved current output resolution – approximately 10,000

·       For models with added external communication (RS-485 or RS-232C), set-up cable (E58-CIFQ1) can now be used at the same time

·       Additional Parameters/Functions:

·       Manipulated Variable limiter

·       40% AT(auto-tuning)

·       Auto-tuning function for cooling gain during heating and cooling

·       Switching direct/reverse operation by event/operation command

·       PV change rate alarm

·       PF Key (Parameter Function Key)

·       Display of three lines

·       Universal thermocouple sensor inputs including types W, PL II

·       Modbus 1 data 2 byte mode

·       Over-current alarm

·       Square root extraction function (only for analog input models)

·       PV/SV status display function

·       Control output cycles can be counted for preventive maintenance. Trigger an alarm for controller replacement based on monitoring of relay use.

• Enhanced machine aesthetics with black or silver models