Schedule a Call Back
Submersible Motors
Submersible Motors
Tech-Mech Engineering Co offers a range of Submersible Motors.
This includes the following models:
- 4†– MCIP 100/100.5/101 and Pre/100/100.5/101 (resign cooled)
- 6†– MATA SF C-150, SML-150
- 8†– MATA SF C 200, SML-200
- 10†– MATA SF C 10
Standards:
- Protection – IP 68; PE2/PE winding insulation for max ambient temperature
- Non-contaminating FES 93 filling
- NEMA standard coupling dimensions
- Lead material in accordance with regulation for drinking water
Materials of construction: These motors are built in CI-FG-260/SS AISI 304, SS AISI 316, etc.
Bore dia and power/phase/voltage range:
- 4" motors, single-phase up to 5.5/4.0 HP/kW (encapsulated and rewindable)
- 4" motors, three-phase up to 15.0/11.0 HP/kW (encapsulated and rewindable)
- 6" motors, three-phase up to 3.0-50.0/2.2-37.0 HP/kW (rewindable)
- 8" motors, three-phase up to 40.0-125/37-93.0 HP/kW (rewindable)
- Lead material in accordance with regulation for drinking water
- 10†motors, three-phase up to 116.0-252/85-185 HP/kW (rewindable)
Shaft seal/mechanical seal:
The choice of material is SiC/SiC provides optimum wear resistance and long life. The spring loaded shaft seal is designed with larger surface area and sand shield. The result is a minimum exchange of pumped motor liquids and no penetration of particles and sand.
Product & Technology News
- Domestic water supply
- Overhead tanks
- Home pressure boosting
- Construction sites
- Gardens/fountains
The Shakti submersible can be fitted on all NEMA pumps.
- High efficiency electrical design for low operation cost
- Elevated starting torque, mechanical compactness, reliability, superior performance
- Water lubricated thrust and radial bearing enable a maintenance free operation
- Special cooling fluid for a better lubricant effect to increase life of moving parts
- The liquid with its high thermal capacity gives the motor superior overload capabilities
- The motors are ready to operate, providing frost protection down to –15°C
- Sand slinger and shaft seal/mechanical seal for high performance in sand
- A preloaded special diaphragm ensures pressure compensation inside the motor
- Standard motor with taping winding insulation for motor ambient of 30°C with a min
- NEMA standard coupling dimensions