Schedule a Call Back
Stenter
Stenter
Swastik Textile manufactures Stenter
| Roller Width | 1500 mm to 3800 mm |
| Fabric Width | 1200 mm to 3600 mm |
| Mangle | Two Bowl or Three Bowl |
| Fabric Feeding Draw Nip | 1 kW / 1.5 kW |
| Mangle Motor | 5.6 / 7.6 / 11 kW |
| Top Roller | 305 mm Diameter |
| Driven Roller | 295 mm Diameter |
| Bottom Roller | 305 mm Diameter |
| Trough | Single Trough with 2 or 3 Guide Rollers or Double Trough |
| Guide Roll Diameter | 114 mm / 141 mm / 152 mm / 177 mm (Wider Width) |
| Weft Correction | Motorised Manual OR Fully Automatic Electronic |
| Stenter | From 3 Chamber to 10 Chamber Pin-Clip Chain, Clip Chain, Pin Chain Vertical Return Pin Chain execution |
| Heating Media | Thermic Oil / Direct Gas / Steam |
| Selvedge Tension Motor | 1.5 kW / 2.2 kW AC |
| Over-feed Motor | 1.5 kW AC |
| Pinning Motor | 0.75 kW AC |
| Blower Motor | 5.6 kW / 7.6 kW / 11 kW |
| Thermic Fluid Heater NaturalGas / LPG Burner Drive |
10/12 Pass OR90,000 Kcal to 1,50,000 Kcal (2 per Chamber) Variable Frequency AC Drive |
| Exhaust | Two, Three or Four with / without moisture controller |
- Automatic Speed Control of machine through programmed Dwell time
- Squeezer Pressure
- Fabric wet pick-up control
- Over-feed control
- Exhaust moisture control in dryer
- Fabric moisture control in dryer
- Width indication and control
- Chamber and fabric temperature control
- Pick Controllers for GSM control