Schedule a Call Back
Solvent Extraction Plants Equipments
Solvent Extraction Plants Equipments
Pragya Equipments offers Solvent Extraction Plants Equipments.
Expander/Extruder
The most modernized unit with updated features and improved metallurgy of worms and hardened sleeve provided throughout the barrel length to protect main barrel from wear and tear. It has hydraulic auto run with adiabatic accumulator and extra long squeezomatic supplied along with expander / extruder. The capacity ranges from 50TPD to1000TPD.
Hydraulic Auto Run for Expander / Extruder
The die and conies made out of special metallurgy duly hardened for better performance i.e. low wear and tear. The body mandrel actuation in phosphorous bronze linear duly lubricated for higher sensitivity and proper action. The hydraulic cylinder is fitted with German polymer seals and hard chromed piston rods duly ground and seamless honed tubes. The hydraulic power pack provided with pump, motor, control valves, pressure switch for auto tripping to save electric energy. The adiabatic accumulator has most modernized setting free, charging free, maintenance free unit highly active and sensitive in energy storage and releasing when required.
Flaking Mill
The flaking mill is the result of innovative engineering and continuous product development. The equipment features quality construction and materials through out. The unique interlinked pivoted bearing housing assures high sensitivity of machine, better life of roll, accurate consistent flaking at higher capacity and ease of operation with low energy consumption, due to stepped roll design. Flaking is done through the length of roll hence no edge grinding required.
Cracking Mill
The purpose for cracking is the oil seed comprising of feed roll special chilled Cl duly grooved, mounted on heavy roller bearing and individual motor of 15 HP for each set of roll, pulleys etc. The machines provided with magnet and geared motor for feeder. The roll size 250 mm dia and 1300 mm long.
Cooker
A cylindrical multistage vessel in M.S constructed with bottom jacketed, also provided with open injection steam connection for proper cooking, central detachable shaft provided with scraper, float arrangement and automatic door closing device will be provided between the stages to ensure preset of material in each stages. The inspection doors and venting pipe connection will be provided in each stage. The vessel will have double bottom 12/14 thick and shell 10mm thick.
Conditioner
A screw feeding device with double wall (jacketed) shell for steam heating and provision for direct steam to heat the material and to add moisture into it to conditioning the flakes to feed in to expander.
Drier Cooler
The purpose for drier cooler is to cool the flakes/ expander cake. The modular horizontal type single pass chain conveyor type, enclosed unit fitted with blowers, cyclones, radiator, gearbox and motors. The capacity is 100 TPD to 1000 TPD reduce the moisture 3%.
Meal Cooler
It is used to cool the temperature of DOC from 95º C to 50º C. The dimension of the cooler is length - 3000 mm to 10000 mm, width - 1000 mm to 2500 mm and height - 1500 mm.
Hydraulic Cylinders & Power Packs
This system is highly sensitive, very simple. It comprises with double acting heavy duly hydraulic cylinders 2 Nos. It has motorized hydraulic power pack with auto tripping mechanism and highly sensitive, maintenance free, setting free adiabatic accumulator.
Condenser / Heat Exchanger
The floating head type shell & tube type two pass / four pass heat exchanger in M.S. / S.S. and S.S. / S.S. The furnace area is from 10 m² to 600 m². The evaporators & economizer is from 20 m² to 350 m².
Modular Design Steam Radiator
It is specialized for any capacity from 20 m² Area to 200 m² area for required pressure.It is easy to replace & clean the module.