Schedule a Call Back
Relay Test Plug
Relay Test Plug
Nelster Welcon offers a Relay Test Plug. This facilitates easy in-situ, on-load testing of relays, metering and control panels without disrupting load circuit. Also it is easy and safe for technicians to isolate protection relays, inject test signals and verify system performance. The housing is robust, high grade phenolic moulding, capable of long, trouble free performance in varied climatic conditions. It is designed and manufactured for indoor application. The terminals are brass, duly nickel plated. The contacts are spring loaded, silver plated and supported by phosphor bronze strips. Each contact is separated with a SRBP shroud. Screws are provided at the rear for terminations. Alternatively studs with nuts and washers could also be provided. Sealing holes on cover studs are provided to prevent unauthorized access. The front cover can be removed for test purpose and replaced, thereafter. This cover fitted with a silver plated contact finger to close the trip contact, when inserted. Otherwise, the tri contact would remain open. Thus the contact finger on the cover completes the entire circuit. Isolation of the trip circuit is feasible by removing the contact finger fitted to cover thus avoiding unwarranted tripping under test conditions.
- Insulation– conforms to requirements of IS-3231
- Tested for 2.5 kV, IR value– 100 MW
- Mounting– test block can be projecting or flush mounted
- Overall dimensions– height 100 mm, width 180 mm and depth 88 mm, add 25 mm for blocks with terminal screws or add 40 mm for blocks with terminal studs
- Rugged construction
- Substantially reduces commissioning and routine maintenance
- Compatible with other popular brands of test plugs
