Schedule a Call Back
Pantograph Milling & Engraving Machine
Pantograph Milling & Engraving Machine
Machine Kraft Industries offers 3D Pantograph Milling & Engraving Machines, Models KD-400 and KD-200. These pedestal type machines are head operated, with very wide applications in every branch of engineering industry. The machine can be used in die-sinking work such as coining dies, forgings-dies and pattern-maker shops. The machine could be used for light milling work also. The macines are built to ensure rigidity and accuracy. The castings are of close grain cast-iron and generously proportioned for rigidity. Close machining tolerances and hand scraping of sliding parts, ensure required accurately built on the machine. The main spindle is fitted with high precision bearings and is designed for a wide range of eight speeds, from 1100 to 12,000 RPM. The wide speed range of the cutter spindle makes it possible to obtain the correct speed for all types of materials. The swivelling point of the pantograph arm system run in needle roller bearings giving a long life without adjustment. Master shaper can be traced very sensitivity and accurately with this sensitivity hinge system. Ease of operation: the food operated switch leaves both hands free and the operator can reach comfortably, in a sitting position, all controls used for adjustment and operation. The reduction ratio of the pantograph arm can be adjusted beyond the usual values very accurately by putting slip gauge blocks between the measuring bases provided on the arms. Brief specifications: Models – KD-400/KD-200; reduction ratio – max – 1:1.5, min 1:10/1.5; pantograph arms – 400/200 mm; spindle collets – 3, 4, 5, 6 mm/4 mm; work table – 200 x 315 mm/120 x 170 mm; number of “T†slots – 4/3; cross travel – 160 mm/100 mm; vertical travel – 320 mm/120 mm; and longitudinal travel – 260 mm/130 mm.