Schedule a Call Back
Low-Pressure Safety Valve
Low-Pressure Safety Valve
Ritcher offers Low-Pressure Safety Valve which is designed for use with corrosive and pure liquids, gases and vapours. This valve can be installed as an angle valve on a vessel or as an inline valve in a pipe.
- Set pressure: +20 mbar to +120 mbar (+0.3 psi to +1.7 psi)
- Set vacuum: -20 mbar to -120 mbar (-0.3 psi to -1.7 psi)
- Weights can be varied in 5, 10 and 20 mbar (0.07, 0.15 and 0.30 psi) increments
- Stainless steel core in guide ensures dimensional stability even at high temperatures
- The set pressure can be adapted to suit subsequent changes in operating parameters by the addition/removal of weights
- The LPV is gas and liquid-tight to DIN EN 12266-1, bubble-tight
- Compromise solutions, e.g. ball check valves, are not necessary
- Direct-acting, weight-loaded
- Proportional opening characteristic
- Top-entry design, very easy maintenance
- Wetted surfaces anti-adhesive
IPF Low-Pressure Safety Valve
Low-Pressure Safety Valve
Pressure Safety Valve
Safety Valve
Valve
Richter
Chemical
Pumps
Valves
PFA
Magnetic Drive Pumps
Sealless Pumps
Mechanical Seal
Shut-Off Valves
Control Ball Valves
Safety Valves
Ball Valves
Lined Pumps
Diaphragm Valves
Globe Control Valves
Butterfly Valves
Anticorrosive
Process Pumps
Centrifugal Pumps
ITT Richter
Lined Valves
Sampling Valve
Drain Valve
Flush Bottom Valve
Strainers
Check Valves
Sight Glass
PTFE Lined
Bromine Pump
HCL Pump
Brine Pump
Caustic Pump
HF Pump
Acid Pump
corrosion
Corrosion Resistant
