Hydraulic Telescopic Platform

• Liftmak Udyog Private Limited
• Gurugram

Hydraulic Telescopic Platform

Liftmak Udyog Pvt Ltd offers a Hydraulic Telescopic, Zero Elbow Platform, Model LMTHP15, mounted on Eicher 10.90F/11.10 or equivalent MMV truck chassis. The LMTHP15 telescopic platform is mountable on any MMV chassis having a wheel-base exceeding 3750 mm. Power for the hydraulic platform is provided by a hydraulic pump driven from chassis power take off unit only. The pump is of ample and sufficient output for normal smooth operation of the platform with low engine speed. Hydraulic reservoir is incorporated in the main frame and hydraulic circuit is fully protected by efficient filters. Pump and motor are of reputed make such as Dowty, Vickers, Danfoss or equivalent. The hydraulic hoses are located so that they do not interfere with the movement of the platform, booms, etc. Hoses offered are Dunlop/Swastik/Superseal or equivalent. The booms are made from MS structural steel of good quality. Telescopic boom (as offered) sections are rigid, reinforced box section. All fabricated sections are rust inhibited from the inside while the exterior surfaces are pre-treated and finished to give a glossy look. The hydraulic controls for all functions (except outriggers) are in the cage. All control levers shall be self-centring and hooded for protection against accidental operations. A hand pump permitting lowering of the boom is provided at the base in case of vehicle engine/electrical system failure. The stabilizer controls are provided only at base, at rear of vehicle.