Schedule a Call Back
Contamination Control Breathers
Contamination Control Breathers
Earth Tekniks offers Contamination Control Breathers, D Series. They are unique, patented air filter and vapour removal system. They replace the standard breather or vent cap on virtually all types of industrial equipment, storage tanks, and transformers. They prevent destructive contaminants from entering fluid reservoirs and tanks as air is breathed in and out due to thermal expansion or fluid level changes. Fluid contamination is one of the primary causes of component wear and lubricant failure in industrial equipment. Models are available to meet the requirements of most industrial applications. These offer protection for all enclosed fluid systems; remove water vapour and abrasive particles; reduce component wear; prolong fluid life; and reduce maintenance costs. Applications are for reservoirs, gearboxes, transformers, storage tanks, etc. D-Series breathers: The five models in this group satisfy most applications involving hydraulic reservoirs, lubrication and fuel storage tanks, transformers, pumps and gearboxes. Models D-100, D-101 and D-102 are rated for airflow of 35 cfm (260 GPM of fluid level change). They are connected to the tank or reservoir using any of several available adapters. Model D-108 is rated for airflow of 100 cfm (750 GPM) and is connected to the tank by a 2" male pipe thread. Model D-109 is rated for 250 cfm (1875 GPM) and is connected to the tank by a 3" male pipe thread. The D-Series Models are 5" in diameter and range from 31.2" to 12" tall.