Schedule a Call Back
Clamp Sensor
Clamp Sensor
Clamps on Probe 3275 Sensors for oscilloscope / memory hicorders, DC to 100 mhz wide-band for observing waveforms. Even with the wide DC to 2 mhz frequency band, current waveforms up to 500 A can be directly observed in applications such as power device and power-on in-rush current monitoring. An optional power supply is available for use with oscilloscopes that do not provide probe power.
- Frequency band width: DC to 2 MHz (-3 dB)
- Rise time: =<175 ns
- Noise level: 25 mA rms max. (band width limited to 20 MHz)
- Continuous allowable input: 500 A rms (requires derating at frequency)
- Max. allowable peak input: 700 A peak (non continuous)
- Output rate: 0.01 V/A (use with a device having a 1 M-ohm input resistance or higher)
- Max. rated voltage to earth: 600 V CAT II, 300 V CAT III (insulated wire)
- Core jaw dia: Ø20 mm(0.79 in)
- Power supply: ±12 V ±0.5 V, 7.2 VA max. (at Max. current measurement)
- Power plug: FFA.0S.304.CLAC42Z / LEMO inc.
- Supplied accessories: Carrying case × 1
- Connects directly to oscilloscope BNC input terminal
- Connects directly to the MEMORY HiCORDER to provide waveform monitoring
- DC to 2MHz (-3dB)
- 500Arms maximum
- 0.01V/A output
- ?20mm (0.79in) dia.