Schedule a Call Back
Centralised Lubrication System, Dual Line
Centralised Lubrication System, Dual Line
Skey Products manufactures Lubomatic range of centralised Lubrication Dual line System for sugar mill bearings. It basically consists of a reservoir with built-in reciprocating plunger pump immersed in the oil, change over valve, dose feeders (dual line metering elements) pressure switch, pipes, hose pipes, fittings electrical control panel, etc. In this type of system, there are two main lines of 16 OD, which run parallel to the sugar crushing mill tandem. From these two main lines, 10 OD pipes are connected to inlet of dose feeders and the outlet of the dose feeders are connected to the lubrication points (bearings). The valve is hydraulically/electrically operated when the pump is switched on, Line 1 is connected and the pressure goes on increasing and when it reaches set high pressure all the points are lubricated as the valve moves forward the line gets blocked and the pressure goes on increasing and line changes to Line 2, and this goes on repeating. The dwell time is adjusted as per requirement and after set dwell time the cycle goes on repeating. The discharge of oil can be controlled by: a. Increasing or decreasing the pause time; and b. By the regulating screw fitted on the dose feeder indicating pin. The system consists of following components: pump, motor, reservoir, changeover valves, control panel, pressure switch, relief valve and piping and fittings.