Schedule a Call Back
Cast Nylon - PA6G
Cast Nylon - PA6G
Anusandhan Plastics Pvt Ltd offers Cast Nylon, ANULON 115, a high-molecular thermoplastic material, which is produced by the active anionic polymerisation of lactams. In the pressureless casting process the monomerous melt poured into moulds and controlled by chemical reaction, is polymerised directly into semi-finished products or shaped cast pieces. ANULON 115 is a solid, low stress homogeneous material with a high degree of crystallinity and is typically light beige in colour. In addition to this, the properties and characteristics are accentuated by means of modification, special settings and additives. ANULON 115 with controlled percentage of molybdenum di-sulphide (MOS2) increases the slip bearing properties, stiffness and wear resistance. ANULON 115 with controlled percentage of oil increases the self-lubricating characteristics and lowers the coefficient of friction. It is the most versatile engineering thermoplastic processed into components, and has replaced successfully steel, cast iron, gun metal and stainless steel, due to low co-efficient of friction against ferrous and non-ferrous metals. Another important factor, both economically and mechanically, is the relative light weight of cast nylon - approximately 1/8 the weight of bronze, 1/7 the weight of the cast iron, and 1/2 the weight of aluminium, which reduces both the inertial and static loads and eases the handling of large components during maintenance or replacement procedures. Bushes, gears and sprockets made of this material give trouble-free service with minimum maintenance and even without external lubrications. It is resistant to all types of greases and oils and solvents, and is noise and shock absorbent, ideal for modern concept of environment. The components are characterised by their high strength, toughness and high impact strength, most suitable in load bearing applications. ANULON 115 cast nylon is available in forms of semi-finished shapes, viz., rods, sheets, blocks, bushes, rings, flats, liners, strips, etc., and finished spares/components, viz., gears, pinions, pulleys, wheels, tyres, rollers, pads, guides, sheaves, slipper pads, inserts, cones, nozzles or any other component as per drawing/specification/sample.