Schedule a Call Back
Anti-Vibration Pads
Anti-Vibration Pads
Gujarat Cork & Rubber offers anti-vibration pads made from high quality rubber elastomeric materials, specially compounded to resist aging, compression set, water and oil. These pads are designed and constructed with alternate rib height to offer additional vibration isolation under both high and low weight loads. These are available in an all-rubber pad with cross-ribbed design; also, a cross-ribbed pad ?? cork centre for additional sound isolation. Durometer of all-rubber pad: 60?5 point on "A" scale. Standard, sheet size is 18" x 18" the all rubber is thick. Smaller sizes are available in cork and rubber pads. Cork and rubber pads: neoprene for resiliency combined with cord for sound isolation. Sizes: 7/8 x 18? x 18?, 7/8? x 6? x 6?, 7/8 x 4? x 4?, 7/8 x 3? x 3?, 7/8 x 2? x 2?. All-rubber pads ? sizes: 3/8 x 18? x 18?. The anti-vibration pad should be measured and cut so there is no more than 50 PSI of machine weight on it when installed. To dampen vibrations, a machine weighing 2,400 lbs will requires an anti-vibration pad of approximately 6" x 8" size. Tilt-beck presses normally carry more weight on the rear legs and therefore pad size should be adjusted accordingly. For impact machines such punch pressed, drop hammers, etc., a lesser loading capacity is recommended generally 25 PSI. A double thickness of pad may be used to accomplish proper loading if desired.