Schedule a Call Back
Pneumatic Piston Cylinder Actuator - Pld & Pls Series
Pneumatic Piston Cylinder Actuator - Pld & Pls Series
Susin I-Tork India (P) Ltd offers a wide range of pneumatic piston cylinder actuator - PLD & PLS Series
Product & Technology News
- Susin I-Tork range PLDS series piston actuator designed for powerful, high performance application in ON/OFF or controlling for the knife edge and Gate valve automation. The Cylinder Range is from 8 inches to 25 inches.
- A suitable solution for your Globe Control Valves because of its higher thrust capability, stiffness, precision movement and higher frequency response.
- The bore size starting from 200mm up to 630mm and the thrust force from 2500Ibf up to 27000Ibf in case of double acting at 60psi (4 bar). In the case of single acting it depends upon selection of spring.
- Manual override by hydraulic cylinder or gear boxes in case of smaller sizes. The pneumatic accessories such as limit switch, solenoid valve and positioner can be provided.
- Its features include: Operating pressure of 150psi (10.3 Bar) permitting substantially higher thrust capabilities than diaphram actuators; tighter valve shutoff due to higher thrust & offers ease of maintenance; responds quickly to signal changes because of double acting configuration; NBR seals are standard, special seal available on request; cylinder materials are cast steel, if needed can be provided in SS and aluminum; end cover material with Cast Iron and optionally provided carbon steel; less weight, good corrosion resistant material construction for custom built thrust and stroke consult the factory.