Flexible Turbulators

  • It is easy to fit, and also easy to remove; it can be cleaned and reused a few times; it is constructed so as to maximise turbulence while minimising pressure drop
  • This is achieved by twisting wire into many circular loops arranged concentrically in a ‘feather duster’ formation around a spine formed from the wire itself; this feather duster formation slants all the loops slightly in one direction
  • There is a hook at one end which enables for an easy pull through the tubes; as they are made from cylindrical wire, there are no sharp edges
  • This prevents any damage to the tubes (specially non ferrous tubes); the loops press against the tube wall in a pressure fit
  • The slant of the loops being in one direction it is easy to pull the turbulators in the direction of the slant for insertion but rather difficult to pull it out in the other direction; the fluid flows into the face of the loops hence pressing them against the tube wall increasing the pressure fit
  • As abundant measure anchors can be provided if required to further hold the turbulators in place in the face of very high pressure.

Hi There!

Now get regular updates from IPF Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Industrial News on Whatsapp! Enjoy

+91 84228 74016

Reach out to us

Call us at +91 8108603000 or

Schedule a Call Back