Cooling Tower

Cooling Tower


Techno Chem Pvt Ltd offers Cooling Tower. The generic term cooling tower is used to describe both direct (open circuit) and indirect (closed circuit) heat rejection equipment. While most think of a "cooling tower" as an open direct contact heat rejection device, the indirect cooling tower, sometimes referred to as a "closed circuit cooling tower" is nonetheless also a cooling tower. A direct, or open circuit cooling tower is an enclosed structure with internal means to distribute the warm water fed to it over a labyrinth-like packing or "fill." The fill provides a vastly expanded air-water interface for heating of the air and evaporation to take place. The water is cooled as it descends through the fill by gravity while in direct contact with air that passes over it. The cooled water is then collected in a cold water basin below the fill from which it is pumped back through the process to absorb more heat. The heated and moisture laden air leaving the fill is discharged to the atmosphere at a point remote enough from the air inlets to prevent its being drawn back into the cooling tower. The fill may consist of multiple, mainly vertical, wetted surfaces upon which a thin film of water spreads (film fill), or several levels of horizontal splash elements which create a cascade of many small droplets that have a large combined surface area (splash fill).

  • Drift - Water droplets that are carried out of the cooling tower with the exhaust air. Drift droplets have the same concentration of impurities as the water entering the tower. The drift rate is typically reduced by employing baffle-like devices, called drift eliminators, through which the air must travel after leaving the fill and spray zones of the tower.
  • Blow-out- Water droplets blown out of the cooling tower by wind, generally at the air inlet openings. Water may also be lost, in the absence of wind, through splashing or misting. Devices such as wind screens, louvers, splash deflectors and water diverters are used to limit these losses.
  • Plume- The stream of saturated exhaust air leaving the cooling tower. The plume is visible when water vapor it contains condenses in contact with cooler ambient air, like the saturated air in one's breath fogs on a cold day. Under certain conditions, a cooling tower plume may present fogging or icing hazards to its surroundings. Note that the water evaporated in the cooling process is "pure" water, in contrast to the very small percentage of drift droplets or water blown out of the air inlets.
  • Blow-down - The portion of the circulating water flow that is removed in order to maintain the amount of dissolved solids and other impurities at an acceptable level.
  • Leaching - The loss of wood preservative chemicals by the washing action of the water flowing through a wood structure cooling tower.

Products from Techno Chem Private Limited

Verified

Iron Removal Plant

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote
Verified

Sewage Treatment Plant

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote
Verified

Effluent Treatment Plant

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote

Products from MACHINE TOOLS, POWER & HAND TOOLS Category

Verified

Perforated Metal Facades

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote
Verified

Rotary Broaching Tool

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote
Verified

Polygon Turning Machine - TPT-5S, TPT-5ST

Deburring, Drilling, Boring, Tapping and Threading Machines

Read more

Request a Quote

Hi There!

Now get regular updates from IPF Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Industrial News on Whatsapp! Enjoy

+91 84228 74016