A well-rounded affair: Low-deformation workpiece clamping

  • Industry News
  • May 24,22
SCHUNK offers the assortment of gripping systems and clamping technology from one source, and with 2,550 SCHUNK grippers the largest product range of standard gripping components on the market.
A well-rounded affair: Low-deformation workpiece clamping

The complete program of gripping systems comprises more than 4,000 components. SCHUNK has pushed digitalization of its portfolio forward for years now, ensuring that users can plan their processes efficiently, transparently and economically.

Those wanting to turn, mill or grind rings, flanges, housings or other thin-walled parts will quickly reach the limits of what is possible using conventional chucks or face plates: the parts are deformed in the clamping process, shaping and geometric tolerances are difficult to adhere to and the interference contours of the clamping devices restrict the accessibility. There are great deals of alternatives here – from the compensating multi-jaw chucks, the magnetic clamping technology right up to the pendulum jaws. To ensure things run smoothly, it is worth knowing the strengths of the individual problem solvers, because this saves time, money and often nerves.


As is so often the case for low-deformation workpiece clamping: there is no one-size-fits-all solution. The requirements of the workpieces, type and frequency of the machining as well as the integration into the process change vary so severely that an individual observation at the user level is always worthwhile. The following questions are primarily important here: what parts are to be machined in what batch sizes? How flexible must the machine be able to be used? What shape and position tolerances must be adhered to? How will the parts spectrum develop in the future? Only when these and other aspects have been clarified can the optimal clamping solution be defined.

Pendulum jaws increase the number of contact points 

For pendulum jaws, users take advantage of the number of clamping points in order to minimize deformations on the workpiece. This way, with identical clamping force and a doubling of the clamping points, the achievable roundness accuracy increases in practice by a factor of 10. Usually, pendulum jaws are made of a movably mounted pendulum body with two clamping inserts, which are mounted on a supporting jaw with the aid of a bearing bolt. For demanding applications, there may be four or six clamping inserts, either soft or case-hardened. As pendulum jaws are mounted like one-piece top jaws, a conventional 3-jaw chuck can be converted into a 6-point clamping in no time at all. As the jaws are adjusted to the workpiece, they can compensate for form tolerances within a certain range, for instance with cast bodies. It is beneficial if such pendulum jaws can be fixed for finish machining or for clamping pre-turned surfaces. Furthermore, the jaws should be as light as possible so as to achieve faster speeds. Calculation programs can be used for calculating what compensation is required for achieving specified concentricity tolerances. Primarily for small tolerances, experience pays off, because with matured special solutions, enormous effects can be attained. But there are also restrictions: pendulum jaws are comparably expensive, they wear out easily, are sometimes quite heavy and restricted when it comes to flexibility.

Compensation jaw with centrifugal force and vibration compensation 

Hydraulic compensation jaws set a new benchmark in hydraulic compensation jaws for low-deformation workpiece clamping. They combine a balancing workpiece clamping with centrifugal force compensation, vibration-damping characteristics and micron-precise concentricity. The integrated oil chamber system is a central feature, above which two or more oscillating clamping elements for clamping rough or finished parts are mounted. As they individually adapt to the workpiece, form tolerances of cast bodies, for example, are reliably compensated. Compared to conventional 3-point clamping, the number of clamping points is increased, which also lowers the deformation of the workpiece and the obtainable roundness is significantly increased. At high speeds, the hydraulic clamping system automatically ensures centrifugal force compensation so that the clamping force is always reliably maintained. In order to minimize workpiece deformation, the clamping force can be considerably reduced in comparison with previous solutions without restrictions on process reliability. For maximum precision on the component, the concentricity can also be adjusted micron-precisely on the chuck jaws. Additionally, the vibration-damping characteristics of the oil chamber system result in a better surface quality of the workpiece and the tool life. Hydraulic compensation jaws are suitable for low-deformation O.D. clamping of rough and finished parts and are available for all lathe chuck sizes and serration types.

Plastic jaws are the most cost-effective alternative 

Special jaws made of glass fibre reinforced plastic are an often underestimated problem solver. Their high coefficient of friction of 0.3 to 0.4 as well as a large angle of wrap ensure that high machining forces can be transmitted even with low clamping forces. Here, the support structure of the aluminium supporting jaw ensures stability. As a result of the low weight, only low jaw centrifugal forces are created during turning operations. As a result, plastic jaws are also suitable for high machining speeds up to 6,000 rpm. In addition, they do not leave any clamping marks even on ground parts or parts with a surface finish. Exchangeable clamping inserts also make the solution attractive from cost aspects as well.

Oscillating mounted 6-jaw chuck ensures high repeat accuracy 

The smaller the tolerances on the workpiece and the higher the required repeat accuracy, the more speaks in favour of oscillating balancing 6-jaw chucks. They consist of a central chuck piston carrying three inner pendulums aligned at 120°. Each pendulum is connected to two base jaws. This ensures workpiece centring between six contact points, which can be adjusted in pairs. As the clamping forces are directed towards the chuck centre, optimal centring is achieved without distortion of the workpiece even for raw parts. Workpieces are aligned and clamped in the 6-jaw chucks in no time at all. The chucks are perfectly adapted to the raw part with their oscillating jaws. For finish machining or for clamping pre-turned surfaces, the pendulums can be clamped similar to the pendulum jaws in the centre positions, meaning all six jaws can move concentrically. Because of its high precision, it is possible to eliminate entire production steps, for example, by reaching tolerances during the finishing process that would otherwise only be reached in complex grinding operations.

Radial pole technology for interfering contour-free machining

Magnetic chucks with electrically activated permanent magnets are a real set-up time killer for low-deformation workpiece clamping. These are used in different versions for low-deformation workpiece clamping. The most common are radial pole plates for which the magnetic elements are arranged radially around the centre. With them, bearing rings for instance can be machined in a single set-up on the outer and inner diameter and on the front side. As the magnetic field acts into the outermost peripheral zone, even large workpieces are clamped securely and without any deformations. Due to the two-dimensional holding force, the machining takes place largely without any vibrations. It protects the cutting edges of the tools and improves the quality of the workpiece surface. To align the workpieces, the holding force can be adjusted using the control system or the holding force regulation. In order to ensure optimum stability, radial pole plates up to a diameter of 4,000 mm should be produced from a single piece. For larger plate diameters, plates in segmental design may be advantageous as these can be transported more easily. To suit the respective application, there are standardized radial pole plates in three versions: for grinding operations, as an AlNiCo single magnet system; for turning operations as an AlNiCo double magnet system with high holding forces. And finally for demanding volume machining with milling and turning as an extra strong AlNiCo neodymium magnet system.

Square pole technology increases flexibility 

Users wishing to act flexibly on mill/turn centres combine magnetic chucks with square pole technology with an efficient pair: they use the magnetic chucks both on top for clamping workpieces and downwards for flexibly placing the clamping solution on the machine table. Such a solution can be set up and loaded with a workpiece in just a few minutes. Here, variable pole extensions ensure a safe and at the same time deformation-free workpiece clamping. Without additional set-up effort, workpieces of varying sizes can be machined alternately with a high level of precision on the quadratic pole plates from three or five sides. With the aid of a multi-level holding force control system, the parts can be aligned within seconds and clamped without any deformations by means of a short current pulse. Like with the radial pole plates, no additional energy feeding is required for square pole technology after having activated the permanent magnet. Compared to conventional clamping solutions, the set-up time is reduced by 30 to 80 percent.

Hybrid chucks combine radial pole technology and a centring chuck 

The peaks of the low-deformation workpiece clamping are formed by hybrid chucks, for which the technology of a classic 3 or 6-jaw centring chuck is combined with the technology of a radial pole plate. The clamping process is designed extremely easily: the workpiece can be manually inserted into the chuck, which will be centred by three chuck jaws, and then securely clamped by electropermanent magnets. Particularly for large rings it is worthwhile that vibrations are eliminated, which has an effect both on the workpiece quality and the tool costs. The parts are simply pre-roughed. Then the magnet is temporarily deactivated in order to release workpiece warping, and then the part can be finish turned. The hybrid chucks can also be activated at varying power levels. They are suitable for use on revolving lathes, mill/turn machines, vertical pick-up lathes and special machines.

Related Stories

Pumps & Valves
Bosch saves 47% energy using Grundfos pumps

Bosch saves 47% energy using Grundfos pumps

Pilot programme at Bosch’s Bengaluru plant reveals big efficiency gains. Bosch was able to cut energy usage by 47% with Grundfos pump solutions and technologies

Read more
Other Industrial Products
Adaptation to digitalisation has helped them to secure market position

Adaptation to digitalisation has helped them to secure market position

B&R Automation offers a complete automation solution that provides maximum flexibility and economic efficiency. In an interview with Trishna Mirajkar, Himanshu Sharma, Head – Marketing & Corporate..

Read more
Other Industrial Products
Rising material & oil prices are affecting machine tools industry

Rising material & oil prices are affecting machine tools industry

Mastercam creates software and services that solve the world’s manufacturing challenges. During an interview with IPF, Vineet Seth, Managing Director – South Asia & Middle East, Mastercam APAC, ..

Read more

Related Products

Industrial Milling Machines

Machine Tools & Accessories

Daljit Machines offers industrial milling machines.

Read more

Request a Quote

Laser Marking Machine

Machine Tools & Accessories

  • To fabricate this range precisely, executives make use of finest class basic material together with modern tools to retain its defect free nature. 
  • This massive industrial know-how and Read more

Request a Quote

Indexable Carbide Inserts Hobs Indexable

Machine Tools & Accessories

LMT (India) offers single-start indexable carbide inserts hobs (ICI). Read more

Request a Quote

Hi There!

Now get regular updates from IPF Magazine on WhatsApp!

Click on link below, message us with a simple hi, and SAVE our number

You will have subscribed to our Industrial News on Whatsapp! Enjoy

+91 84228 74016

Reach out to us

Call us at +91 8108603000 or

Schedule a Call Back