• DockLifts Material Handling Equipment

Hydraulic Scissor Lift Tables

Hydraulic Scissor Lift Tables operate with the help of power unit and push button control station. The power unit has of 2-5 HP power pack 3/8” hydraulic hose of length up to 5 meter. It contains all the major components like motor, high-pressure gear pump, oil filters (located in the manifold) and oil reservoir. Apart from this the power unit also includes pressure relief valve. Hydraulic Scissor Lift Tables are made of platform, hinged bridge, removable handrails, cylinders, and bearings. The platform is built with heavy no-skid high tensile checker plate followed by reinforcing with steel beams to offer it strength and rigidity. The length of hinged bridged is 300mm and is fabricated on non-skid high tensile steel checker plate. It comes with plated lifting chain and the lip edge in it is chamfered. Bearings at pivotal are permanently lubricated with Teflon impregnated bushings. The rods of two piston type hydraulic cylinders are made of hard-chrome steel. It contains self-adjusting polyurethane seals, positive internal stops and fitted with vent lines. Safety devices in the lift tables are the velocity fuses on each cylinder, warning labels and handrails & the safety chain. The capacity range of the units varies from 1000kgs to 8000kgs. The units come in yellow colour, toe guards in yellow/black where as the handrails painted with black. The standard model size for lift tables is in between 1800 mm X 2500mm and 2100mm X 2500mm.