• Datar Engineering & Consultancy Private Limited

Mechanical Vertical Lift

Datar Engineering & Consultancy (DECON) offers Mechanical Vertical Lift, Series M, used to move material between two or more levels. Series F lifts features four-corner support for heavy-duty, vertical material handling. Principal components are guide columns, carriage and mechanical actuating mechanism.

Series M Vertical Lifts are available with:

• Lifting capacities of 3000 kg
• Carriage size as 3 x 3 mtr or more
• Unlimited vertical rise
• Standard travel speed is 618 mtr per min
• Higher speeds available on special order

• Guide columns are 150 mm wide
• Carriage is a fabricated structural member with deck plate
• Other deck surface can be supplied
• Carriage is available in straddle or cantilever styles depending on application

• Carriage is lifted and lowered by roller chain attached to an electric motor-reducer assembly mounted on the guide columns
• Power units employ 2 HP to 10 HP TEFC brake motors

• Standard power requirements are 415 V, 3-phase
• Control voltage is 24 V; and control station, provided for each level, include self maintaining, push buttons with mushroom-head E-Stop button

• Upward and downward travel of the carriage is limited by an E-limit switch – when the switch is tripped, the motor shuts off and brake is engaged
• Overload protection is provided by relay that measures the motor current; if the current exceeds the amount required to move the maximum load, it will shut the unit down and engage the brake
• Safety can (optional) mounted on each guide column, prevents uncontrolled descent in case both chains brake
• Chain tensioners and guide prevent chains from jumping on sprockets
• No rider signs are posted at each point of operation

• Upward and downward travel of the carriage is limited by an E-limit switch – when the switch is tripped, the motor shuts off and brake is engaged
• Overload protection is provided by relay that measures the motor current; if the current exceeds the amount required to move the maximum load, it will shut the unit down and engage the brake
• Safety can (optional) mounted on each guide column, prevents uncontrolled descent in case both chains brake
• Chain tensioners and guide prevent chains from jumping on sprockets
• No rider signs are posted at each point of operation