• AMAC Innovatives

Fork Lift Truck, 16-Tonne

AMAC Innovatives offers a 16-Tonne Fork Lift Truck. This comes with the following specifications: lifting capacity – 16 tonnes; load centre – 1200 mm; wheel base – 3750 mm; stability – 36 Percentage; gradeability – 40 Percentage; driving speed, laden/unladen – 32/38 mtr/sec; lifting speed, laden/unladen – 0 .14/0.29 mtr/sec; lowering speed, laden/unladen – 0.29/0.20 mtr/sec; gross vehicle weight, laden/unladen – 41760/25760 kg; static weight on front axle, laden/unladen – 37040/11860 kg; static weight on rear axle, laden/unladen – 4450/13900 kg; tyres (front and rear) – 12.00 x 24, 18 PR; tilting angle, forward/backward – 5 Degree/10 Degree; and turning radius – 5250 mm. The drive axle is a heavy-duty 60-tonne static capacity unit. The axle is rigid mounted on the chassis and is provided with planetary hub reduction. Service brake is provided on front drive axle. The clutch is multiple wet disc type (HASR) – foot operated. Parking brake is provided at the input shaft of the drive axle, fail safe (SAHR) type, dry disc, caliper type – hand operated. Steering axle and steering system: articulated type, mounted to the chassis through two hardened pins, hydraulic steering system with load sensing priority valve and with double acting heavy-duty steering cylinder. Hydraulics: heavy-duty tandem vane pump driven by transmission PTO, provided for main hydraulics and for steering system. Pilot operated directional control valve with in-built relief valve is operated by means of dual-axis joystick for smooth and accurate controls. Hydraulic brake system is completely isolated from main hydraulics system for better efficiency, for reliability and maintainability. The operator cabin is manufactured from welded hollow steel sections and skinned with heavy gauge steel sheets. Safety glass is fitted throughout and all opening windows are of sliding type. Adjustable rear view mirrors are fitted on both sides.