• Techflow Enterprises Private Limited

Ventury Scrubber

Techflow Enterprises Private Limited offers Ventury Scrubber. The design of the Techflow Ventury Scrubber consists of a “wet approach” ventury followed by a liquid entrainment separator. Dust laden gases enter the ventury and instantly make contact with the tangentially introduced scrubbing liquid swirling down the venturi’s converging walls. At the venturi throat, the gas and liquid streams collide and the liquid breaks down into droplets, which trap dust particles.

• This gas/liquid mixture passes through a flooded elbow, and then enters the entrainment separator through a tangential inlet.
• Centrifugal action removes the heavy wetted particles from the gas stream.
• As an alternate, when very large diameter separators are required, the liquid is separated by passing the stream through a chevron-type mist eliminator baffle.
• The dust/liquid mixture is discharged from the separator bottom drain and the cleaned gas leaves through the top of the separator.