• Enviro-Treat Engineers

Venturi Scrubber

Enviro-Treat Engineers offers Venturi Scrubber. It is conventional in every respect, this venturi scrubber features wet approach inlet which eliminates wet/dry line build-up problems. Unit can be furnished with a fixed, butterfly or two-door venturi throat section; smooth or flooded elbow and a conventional cyclonic mist separator. The larger separators may be furnished with radial inlet and mesh pad or chevron type demister section. Dust laden gases enter the unit vertically. Scrubbing liquid is introduced utilizing tangential pipes and a spray header, if required, over the venturi throat section to ensure complete coverage. The venturi throat is set to operate at desired pressure drop for highest collection efficiency. Scrubbed gases then make a 90º turn and enter a cyclonic separator where separation of the gases and free liquid droplets takes place. The slurry is discharged through the bottom and dewatered scrubbed gases are exhausted vertically via the top outlet.