• Arempee Industries

Two post lifts - model RTPH 3000

Electro mechanical two post lifts from Coimbatore-based Arempee Industries are recommended for vehicles up to 3 tonnes in weight, but tested with much higher loads and are fitted with overload cut-off and limit switches. The screws are automatically lubricated during movement by the oil pump that sends oil to the top of the main nut at every rise operation. The angular gearboxes in the oil bath and a rotating shaft transmit the torque from the drive spindle to the corresponding spindle inside the opposite post. Unlike chain or cable transmission, the shaft does not need adjustments. These lifts are suitable to modern workshops. Features: Screw rods and their nuts are designed to the accurate load calculation Lift provided with safety device to block the lifting if nut is completely worn-out Adjustable sliding system in columns designed to arrest shake and noise during operation Sliding systems having low friction and high resistant to wear, are self-lubricated Breadth of columns is wide enough to accommodate fully open doors of any vehicles in lifted position Lift is fixed with articulated short arms Arms provided with height adjustable rubber moulded lifting pads Columns and slides fully covered to protect the moving parts from dirt and moistures Movement is transmitted from one screw to another by means of bevel gear box Technical specifications: Lifting height: 2000 mm maximum Lifting time: 1 minute (approximately) Power required: 2.2 kW Base length: 3100 mm (3.10 mts) Base breadth: 1500 mm (1.50 mts) Base height: 75 mm Overall height of lift: 2750 mm (2.75 mts) Breadth between columns: 2500 mm (2.50 mts) Vertical adjustments of pads: 50 mm Minimum height of pick up pads: 120 mm