• Diamant Triumph Metallplastic Private Limited

Plastic Metal-Metal Repair Systems

Diamant Triumph Metallplastic Pvt Ltd offers Diamant Plasticmetal – a Plastic Metal-Metal Repair Systems. This is the perfect material for small and medium surface repairs on any kind of metal. Because of its high amount of fillers Plasticmetal has a very good metal finish and is machinable like metal. With its fast curing time and flexible mixing ratio it is a very useful product especially for foundries and any kind of metal. Diamant Plasticmetal consists of two components – the hardener liquid and the base powder. The base powders can be combined with any of the 8 hardener liquids to obtain special properties. It is possible to mix different powders together with one hardener liquid for colour matching. Roughen the adhesion surface (enlargement of adhesion area, good anchoring points) and clean chemically (optimum: Diamant cleaner). The surface has to be clean and dry and within the optimum working temperature range between +5°C/+45°C. Mix powder and hardener liquid at least at a ratio of 1:1 by volume (liquid, castable viscosity). Through addition of powder you can adjust the viscosity from liquid to putty which can be applied by spatula. The maximum mixing ratio is 3:1 (powder: liquid). First apply a thin adhesion layer, then add the remainder up to the desired layer thickness. The cure time depends on the used hardener liquid and varies from 5 to 60 minutes.