• Menzel Vision and Robotics Private Limited

Metallography Workstations

Menzel Labortechnik offers Metallography Workstations, MEGA 9099. Features: Microscope stand: sturdy, well contoured and practical inverted and ergonomically designed; Viewing head: binocular observation head conveniently inclined at 45° off the horizontal, with coated prisms and inter-pupillary & dioptric adjustment. Trinocular port for CCD or 35 mm camera; Focussing: co-axial focussing module with slides travelling on ball bearing guide ways. Large, graduated mechanical stage with low drive co-axial controls for X-Y movement, on the ball slides; Nosepiece: quadruple revolving nosepiece for quick magnification change, with positive click stops for proper centering; Objectives: special flat field, glare-free, high-contrast parafocal plan objectives M10x, M20x, M40x & 100x (oil); Eyepieces: compensating high eye point wide field eyepieces HKW 10x (field no: 18); Magnification: 100x to 1000x for visual observation, 50x to 1600x digital on monitor; C mount: built-in C mount to interface CCD/digital camera; Illumination: a special 6 V/50 W halogen illuminator powered by switch-mode power supply (SMPS) to ensure constant output voltage ideally required for microphotography; Accessories: grain size eyepiece, filial eyepiece, 100x dry plan objective, CCD camera, image analysis system.