• Sevana Trades & Services Private Limited

LIQUID PACKING MACHINES

Sevana Trades & Services manufactures liquid packing machines. These are available in three models, each designed for different use: QS200FFW - for packing preset quantity of water - single jaw round element (seal and cut); QS 200 FFL - for packing preset quantity of water, soft drinks, etc, with low viscosity; and QS200 FFLO - for packing preset quantity of oil, double jaw sealing head with a mechanical cutter. The fluid to be dispensed has to be stored in an overhead tank from where it is to be connected to a subsidiary tank with a float valve arrangement to maintain a constant head of fluid to the machine. The float control valve shall be large enough so that the fluid taken out from the subsidiary tank is immediately replenished. The outlet of the subsidiary tank is connected to the inlet port of the machine. It is recommended to have control valves between the main tank and subsidiary tank; subsidiary tank and the machine for the convenience of shut down and maintenance. In the case of FFL and FFLO subsidiary tank should be maintained at a height of four metres from the ground level, and it is six metres in the case of FFW machine. These machines are provided with a funnel with long tail. Continuous tube form pouches can be loaded to the funnel tail. Production capacities of these machines are 8 to 10 pouches per minute depending upon the viscosity of the liquid packed and the pressure.